Schiller One-Piece 10-Lead EKG Cable without resistance
Technical Specifications:
Environmental Specification:
SZMEPLUS offer:
Leadwires size:
Payment:
Transportation Methods:
warranty:
1, Reusable spo2 sensors are carried 12 months warranty to repair for free due to the quality problems since ex-factory;
2, ECG cable and leadwires, spo2 adapter cable, EKG cable are carried 6 months for free (excluding disposable spo2 sensor), but including the misuse, negligence or accidents causing from the buyer.
Return:
For all warranty return items, prior authorization to return merchandise must be obtained by contacting SZMEDPLUS. If the items are not covered under warranty, customer is responsible for all shipping fee 25% restocking fee.
Contact information:
Company:Shenzhen Medplus Accessory Co.,LTD
Saler: Jenie Wei
Compatibility:
| Manufacturer | Model |
|---|---|
| BTL | Serie BTL-08 |
| Bionet | cardiocare 2000, cardiotouch 3000, cardio7 |
| Edan | SE-1010, SE-1212 |
| Esaote | P80, P80six, P80power.P8000, P8000power |
| Innomed | MAC 500, MAC 1100, MAC 1200 |
| Kontron | EKG P80 |
| Schiller | AT10, AT10 Plus, AT101, AT102, AT102-Plus, AT104, AT110, AT3, AT5, AT6, AT60, C6, CS6, MS2010, MS2015 |
Technical Specifications:
| ECG interpretation: | Schiller ECG Analysis Program for Adults and Pediatrics |
| Computerized measurements: | 12-lead analysis |
| ECG analysis frequency: | 500 samples/second (sps) |
| Digital sampling rate: | 2,000 samples/second/channel |
| Dynamic range: | AC Differential ± 5mV, DC offset ±300 mV |
| Resolution: | 4.88 μV/LSB @ 500 sps |
| Frequency response: | -3 dB @ 0.01 to 150 Hz |
| Low cut-off frequency: | 0.01 Hz, 0.02 Hz, 0.16 Hz or 0.32 Hz (-3 dB limits) |
| High cut-off frequency: | Configurable at 20 Hz, 40 Hz, 100 Hz or 150 Hz |
| Common mode rejection: | >100 dB (with AC filter switched on) |
| Input impedance: | >10MΩ @ 10 Hz, defibrillator protected |
| Patient leakage: | <10 μA |
| Heart rate meter: | 30 to 300 BPM ±10% or ±5 BPM, whichever is greater. |
| Start-up time: | Less than 7 seconds |
Environmental Specification:
| Temperature Operating: | 5°C to 40°C | Transport/storage: | -15°C to 50°C |
| Humidity Operating: | 25% to 95% RH non-condensing; | Transport/storage: | 25% to 95% RH non-condensing |
| Pressure Operating: | 700 to 1060 hPA | Transport/storage: | 500 to 1060 hPA |
SZMEPLUS offer:
| P/N | Description | Connector Imagine |
| MPK031A | IEC Din3.0 No resistance |  |
| MPK031B | AHA Din3.0 No resistance | |
| MPK031C | IEC Banana No resistance | |
| MPK031D | AHA Banana No resistance | |
| MPK031E | IEC Snap No resistance | |
| MPK031F | AHA Snap No resistance | |
| MPK031G | IEC Clip No resistance | |
| MPK031H | AHA Clip No resistance |
Leadwires size:
Payment:
Transportation Methods:
warranty:
1, Reusable spo2 sensors are carried 12 months warranty to repair for free due to the quality problems since ex-factory;
2, ECG cable and leadwires, spo2 adapter cable, EKG cable are carried 6 months for free (excluding disposable spo2 sensor), but including the misuse, negligence or accidents causing from the buyer.
Return:
For all warranty return items, prior authorization to return merchandise must be obtained by contacting SZMEDPLUS. If the items are not covered under warranty, customer is responsible for all shipping fee 25% restocking fee.
Contact information:
Company:Shenzhen Medplus Accessory Co.,LTD
Saler: Jenie Wei