Digital Heart Rate Monitor ECG SPO2 Pulse Oximeter
Features1. Continuous operation for 20 hours with low power consumption.
2. Low battery indicator.
3. Low-voltage indicator light automatically shuts down in 8s when signal is out.
4. Small and light, easy to carry
Key function description: In standby mode, press the key to start the working state,
press this button lightly to change the display mode under working status.
The outline picture of the product is for reference only, which is subject to physical objects.
Instructions for Use:
| 1. Install a pair of AAA batteries into the battery box. |
| 2. Insert your finger into the rubber hole of the oximeter. |
| 3. Put your finger into the test position of the oximeter, and lightly press the button on the panel of the oximeter to automatically test the results within about 8 seconds. |
| 4. When the oximeter is working, do not shake your fingers or move your body. |
| 5. Press the touch button on the panel to adjust the direction of the display interface according to usage habits. |
| 6. If there is no finger inserted, the device will automatically shut down within 8 seconds. |
Hanging Rope Installation
1. Pass the thin end of the rope through the hole.
2. Thread the end of the thicker rope through the thinner rope and tighten.
Product acessories:
User Manual * 1
Hanging rope * 1
Quality Control Card * 1
Notes:
1.This product is not a medical product, the measured data is for reference only. If there is any abnormality, please consult a doctor in time.
2.Please read the instruction manual carefully before using this product, and operate according to the technical parameters.
3.When the product is not in use for a long time, please remove the battery to avoid damage to the product by battery leakage etc.
4.The nail surface must be upward when you insert the finger into the oximeter.
5.Please clean the rubber with alcohol before each test, and use alcohol to clean the finger before and after the test.
(The inside of oximeter is a kind of rubber. It has no toxins, does not cause harm, and does not cause side effects such as skin allergies.)
Detailed description of product functions:
1. Digital tube display.
2. SpO2: Measuring range: 70% ~ 99%
Accuracy: ± 2% in the range of 80% ~ 99%;
± 3% in the range of 70% ~ 79%;
No other range defined
3.PR: Measuring range: 30BPM ~ 240BPM
Accuracy: ± 1BPM or ± 1%
4. Power supply: two AAA 1.5V alkaline batteries
5. Power consumption: below 30mA
6. Product size :: 58 * 32 * 31mm
7. Automatic shutdown: the product automatically shuts down without putting your finger for more than 8 seconds.
8. Operating environmentTemperature: 5 ºC ~ 40 ºC
Humidity: 15% ~ 80%
Atmospheric pressure: 70kPa ~ 106kPa
Transportation and storage environment: Temperature: -10 ºC ~ 55 ºC
Humidity: 95%
Atmospheric pressure: 50kPa ~ 106kPa, non-corrosive
Well ventilated environment.